Uniden BC365CRS English Owner's Manual - Page 18
Connecting An Antenna, Using The Backlight
View all Uniden BC365CRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
display shows the initial clock time of 12:00 AM. The scanner remains in STANDBY mode. Connecting an Antenna The scanner uses an external loop antenna to receive AM broadcast stations and an external telescopic antenna to receive all other signals. Connect the supplied rod antenna by pushing the antenna's connector onto the antenna jack on the back of the scanner and twisting it to the desired angle. Connect the two wires from the loop antenna to the AM RADIO ANT terminals on the back of the scanner. You can also use an external antenna (not supplied) to help to bring in weaker signals. Use RG58, 50-Ohm lead with a BNC connector to connect the antenna to the scanner. Connect and mount the antenna according to the instructions provided with the antenna. CAUTION: Be sure to follow all safety warnings provided with the antenna. Failure to do so could expose you to risk of injury or death and could severely damage the scanner. Using the Backlight To turn on the backlight for 15 seconds, tap SNOOZE/Light. To turn on the backlight permanently, press and hold SNOOZE/Light for over 2 seconds. To turn off the backlight, press and hold SNOOZE/ Light again. 18