Uniden BC365CRS English Owner's Manual - Page 19

USING THE CLOCK Your scanner's clock displays whenever you turn off the radio functions. It can also be used as a standard alarm clock. Setting the Current Time Follow the steps to set the current time: L 1. Move the slide switch to Clock Set. The hour digits flash. 2. Press ▲ or ▼ to change the hour by one hour increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash. 3. Press ▲ or ▼ to change the minute setting by one minute or press the appropriate number keys to enter the minutes. The seconds reset to 00. Press E/PGM, A M / P M flashes. 4. Press ▲ or ▼ to move from AM to PM and back. Make your selection, and then move the slide switch to Clock. The scanner exits the clock setting mode. ## Seconds resets to zero (0) when you reset the time. Setting the Alarm Time Follow these steps to set the alarm time: L 1. Move the slide switch to Alarm Set. The hours digits flash. 2. Press ▲ or ▼ to change the hour by one hour increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash. 3. Press ▲ or ▼ to change the minute setting by one minute or press the appropriate number keys to enter the minutes. Press E/PGM to set the minutes. The A M / P M display icon flashes. 4. Press ▲ or ▼ to move from AM to PM and back. Press E/PGM to make your selection. To lock in the alarm time, move the slide switch to Clock. L To have the BC345CRS alert you at the preset time, slide Off/Radio/Tone to either Radio or Tone. If you set the selector to Radio, the alarm will sound with the selected audio source (AM/FM, Scanner, or Weather). If you set the selector to Tone, the scanner will sound a tone at the preset time. To silence the alarm, slide Off/Radio/Tone to Off. If you do not turn off the 19