Uniden BC9000XLT English Owners Manual - Page 13

If an error is made during programming, or if the frequency is out of range, this screen appears. Enter a valid channel or frequency number. If the frequency is stored in another channel, the display will indicate the original channel for that frequency. Bank A P ch 1 OUT OF BAND Bank A ch 1 DUPLICATE CH 230 To program more channels, repeat steps 3 and 4. Press e to store the same frequency into the selected channel. Or, select another channel. Or, press ? twice to clear. Programming With the Rotary Tuner Use these controls: MEM COUNT AUX SHIFT STATUS PROG SEND ALPHA HOLD SRC AUTO LIMIT LINE EXT SP TWIN TURBO SCAN MANUAL PRI TURBO CTCSS DATA L/O DELAY ATT BRI 1 AM 4 5KHz 7 CLR DIM 2 NFM 5 12.5 KHz 8 50KHz 0 OFF 3 WFM 6 25KHz 9 HI-CUT E A B F G FREQ BC9000XLT CD E HI CHAN J SQUELCH LOCK VOLUME OFF Scan, Numeric Keys, and Rotary Tuning Controls 1. Press mto enter the Manual Mode. OR Press LOCK, then turn the Rotary Tuner. Bank B ch 49 L/O 000.0000MHz Note: Make sure the LOCK LED is out. 2. Press CHAN, then turn the knob. Example: Channel 52 Turn right to step up through channels, left to step down through channels. Bank C ch 52 L/O 000.0000MHz Note: The channel selection flashes on the display, indicating that the frequency displayed is not programmed in that channel. 13