Uniden BC9000XLT English Owners Manual - Page 46
CTCSS Board - parts
View all Uniden BC9000XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Align the pins on the CTCSS Board installed CTCSS Board with the sockets on the mother board. Make sure they go straight into the sockets. The 4 pin socket is toward the front of the scanner. The 3 pin socket is toward the back of the scanner. 3 pins 4 pins 5. Gently push straight down on the CTCSS Board until the pins are fully seated in the sockets. To speaker (Inside Top Cover) 6. Carefully replace the cover and the five screws. Note: The tabs on the cover hook under the front part of the chassis. 46
4.
Align the pins on the
CTCSS Board with
the sockets on the
mother board. Make
sure they go
straight
into the sockets.
The 4 pin socket is
toward the front of the
scanner.
The 3 pin socket is
toward the back of
the scanner.
5.
Gently push straight
down on the CTCSS
Board until the pins
are fully seated in
the sockets.
6.
Carefully replace the cover and the five screws.
Note:
The tabs on the cover hook under the front part of the
chassis.
46
To speaker
(Inside Top
Cover)
CTCSS Board installed
3 pins
4 pins