Uniden BEARCAT 880 English Owner's Manual - Page 6
Channel Selector/MENU/OK, MENU/OK, Channel, Selector, S/RF/CAL/SWR, CB/PA, MEM/SCAN, 19/NORM, RF - mic gain
View all Uniden BEARCAT 880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6. Channel Selector/MENU/OK. Press the inner MENU/OK button to select a menu option or other selection. Turn the outer Channel Selector knob to: Select channels Select menu modes Change scan resume direction (up or down) Control Talkback volume Control Mic gain level Control Calibration volume All channels except Channel 9 may be used for normal communication. The FCC reserves Channel 9 for emergencies involving the immediate safety of individuals or protection of property. Use Channel 9 to render assistance to a motorist. This is an FCC rule and applies to all CB operators. 7. Microphone socket. 8. Indicators turn on when the function is turned on. 9. S/RF/CAL/SWR: Push to to check RF signal strength, calibration, and SWR reading. 10. CB/PA: Selects CB (Citizens Band) or PA (Public Address). Do not use the PA function unless an external speaker is connected. 11. MEM/SCAN: Press to start or stop scanning modes [All Channel Scan (see page 10) and Memory Scan (see page 12)]. Press and hold to set or clear channel memory while in Memory mode. 12. 9/19/NORM: Press to switch between emergency channel 9, channel 19, and standard CB channels. 13. Frequency Display: Displays the MHz of the selected channel. Also displays menu options. 14. ANL: Turns ANL (Automatic Noise Limiter) feature on and off. ANL reduces external noise. 15. NB: Turns NB (Noise Blanker) feature on and off. NB reduces interference from vehicle ignition systems. 16. RF Gain knob: Improves reception in strong signal areas. 6