Uniden CEZ202 English Owners Manual - Page 4

Wall-Mounting the Phone You can mount the phone on any standard telephone wall plate where the pins are 100 mm (315/16 inches) apart. Connect the cords as usual, but route the line cord through the inside channel. Before putting the handset in the cradle, you need to switch the handset clip into Tuck excess line cord into the space on the back of the phone. wall mount mode as shown in the drawing below. Line up the notches on the base with the pins on the wall plate. Place the phone over the plate and slide it down to lock it into place. Flip the clip from front to back. Slide the clip out of its slot. Slide it back into the slot. Rotate the clip 180 degrees. Solving Problems If you have any trouble with your phone, try these simple steps first. If you still have a question or problem, call the Customer Hotline listed on the front page. Problem Things to try I keep hearing a dial tone Checking the Tone/pulse switch: if it's on when I try to make a call. tone, change it to pulse and try again. The phone rings, but I can't Checking the coiled cord connection hear anything. between the base and the handset.