Uniden CMX760 Owners Manual - Page 15
Disconnect the Microphone, INSTALL RADIO BRACKET/INSTALL RADIO, Attach Side Rails
View all Uniden CMX760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2. Insert the MIC jack into the radio's MIC socket until it clicks into place. 3. Gently tug on the cable to be sure the connection is locked. 4. Slide the rubber cover down the cable and cover the MIC jack to seal it from dust. If you want to use the extension cable, connect the cable to the radio and the MIC to the other end of the extension cable. Disconnect the Microphone 1. Pull back the MIC jack rubber cover and slide it back along the cord. 2. Push down the MIC jack's lock tab; tug gently on the MIC cord until it disconnects. If you are using the extension cable, disconnect the cable from the radio and the MIC from the other end of the extension cable. INSTALL RADIO BRACKET/INSTALL RADIO The CMX760 uses a slide mount assembly to mount the unit onto a surface. It can be mounted either below or on top of a surface. Attach Side Rails 1. Align the guide rails along the sides of the radio and insert L-tabs into the L-tab 15