Uniden CXAI5198 English Owners Manual - Page 48

note •If the recording memory is full, you can not record a conversation until you clear some messages from the memory. •Every state has different regulations governing the recording of conversations over the telephone. Make sure to check your local, state and federal laws before using this product to record any telephone conversation in order to determine that your use is in compliance with such laws or guidelines. •You can not record intercom conversations. •To activate this feature, you must turn the Call Screen feature on. See "Setting the Call Screen" on page 39. Recording a conversation You can record a conversation from the handset or the base (more than two seconds and less than ten minutes). 1) During a conversation, press rec/remote/call screen on the handset or press and hold memo/call rec on the base. 2) Recording a Call appears on the display. A confirmation tone that can be heard by both parties sounds during recording. 3) To stop recording, press rec/remote/call screen on the handset, or memo/call rec or (play/stop) on the base. Screening a call From the base To screen an incoming call, use the following steps: 1) After the answering system answers, the base speaker will let you hear the calls as the machine records the message. To adjust the volume, press the volume up or down key. If you turn the answering system off, you cannot screen a call. 2) To answer the call, pick up the corded handset or press (speaker) on the base. To mute the Call Screen, press mute or (play/stop). To cancel muting, press / / /select/volume. From the handset Press rec/remote/call screen when the system is answering. To cancel the Call Screen, press end or return the handset to the cradle. To answer the call, press talk/flash or any number (when AutoTalk is set to on). The answering system will disconnect automatically. THE INTEGRATED ANSWERING DEVICE [47] THE INTEGRATED ANSWERING DEVICE www.uniden.com