Uniden CXAI5198 English Owners Manual - Page 57
Symptom, Suggestion, TROUBLESHOOTING [56]
UPC - 050633280058
View all Uniden CXAI5198 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
TROUBLESHOOTING Symptom Severe noise interference. The Caller ID does not display. The answering system does not work. The answering system does not record any messages. Messages are incomplete. After a power failure, the outgoing message is deleted. No sound on the base unit speaker during call monitoring or message playback. Cannot access remote call-in features from another touch tone phone. Suggestion • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move the base to another location or turn off the source of interference. • The call was answered before the second ring. • The call was placed through a switchboard. • Your Caller ID service may not be active; contact your local telephone service provider. •Make sure the AC adapter is plugged into wall outlet. •Make sure the answering system is turned on. •Set the record time to either the one minute or four minute option. •The memory may be full. Delete some or all of the saved messages. •The incoming messages may be too long. Remind callers to leave a brief message. •The memory may be full. Delete some or all of the saved messages. • Record your personal outgoing message again. The default message should remain. • Adjust the speaker volume on the base unit. • Make sure the call screen feature is set to on. • Make sure you're using the correct PIN code. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your phone. www.uniden.com TROUBLESHOOTING [56]