Uniden D1760-2W English Owner's Manual - Page 16

Resetting Handsets, Registering Handsets, Adapter and Battery, Information

Page 16 highlights

Resetting Handsets If you have trouble with a handset or if you want to replace one, clear the registration information from the base and the handset: 1. Press & hold END and # at the same time until you see the System Reset menu. 2. If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don't have that base anymore, select Base Unavailable. 3. To confirm, select Yes. The handset displays Handset not registered. Registering Handsets If you see a "not registered" message on a handset, you must register it to a base before using it. 1. Place the handset in the base; the display should say Handset Registering. 2. Wait until the display says Registration Complete (about 30 seconds), then pick up the handset and press TALK/FLASH. 3. If you don't hear a dial tone or the display says Registration Failed, charge the battery completely, then try again. Adapter and Battery Information AC adapter Part number PS-0035 Input voltage 120V AC, 60 Hz Output voltage 8V AC @ 300mA xxUse only the supplied AC adapters. xxUse the proper adapter for the base & any chargers. xxDo not place the unit in direct sunlight or subject it to high temperatures. 16 Battery pack (with normal use) Part number BT-1021 Capacity 300mAh, 2.4V DC Talk time about 7 hours Standby time about 7 days Battery life about 1 year xxReplace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover). xxWhen the battery gets low, the handset beeps and shows a low battery alert; put the handset in the cradle for recharging. Rechargeable Battery Warning xxThis equipment contains a rechargeable Nickel-Metal-Hydride (Ni-MH) battery. xxNickel is a chemical known to the state of California to cause cancer. xxDo not short-circuit the battery. xxThe batteries in this equipment may explode if disposed of in a fire. xxDo not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode. xxAs part of our commitment to protecting our environment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used Ni-MH batteries within the United States. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.) Rechargeable batteries must be recycled or disposed of properly.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

16
Resetting Handsets
If you have trouble with a handset or
if you want to replace one, clear the
registration information from the base
and the handset:
1. Press & hold
END
and
#
at the same
time until you see the
System Reset
menu.
2. If you still have the base the handset
is registered to, select
Deregister HS
,
then select the handset you want
to reset. If you don’t have that base
anymore, select
Base Unavailable
.
3. To confirm, select
Yes
. °e handset
displays
Handset not registered
.
Registering Handsets
If you see a “not registered” message on
a handset, you must register it to a base
before using it.
1. Place the handset in the base;
the display should say
Handset
Registering
.
2. Wait until the display says
Registration Complete
(about 30
seconds), then pick up the handset
and press
TALK/FLASH
.
3. If you don’t hear a dial tone or the
display says
Registration Failed
,
charge the battery completely, then
try again.
Adapter and Battery
Information
AC adapter
Part number
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage
8V AC @ 300mA
x
Use only the supplied AC adapters.
x
Use the proper adapter for the base &
any chargers.
x
Do not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number
BT-1021
Capacity
300mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
x
Replace the battery when the talk or
standby time becomes noticeably re-
duced. For replacements, call the Parts
Department (see the front cover).
x
When the battery gets low, the handset
beeps and shows a low battery alert; put
the handset in the cradle for recharg-
ing.
Rechargeable Battery Warning
x
°is equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
x
Nickel is a chemical known to the state
of California to cause cancer.
x
Do not short-circuit the battery.
x
°e batteries in this equipment may
explode if disposed of in a fire.
x
Do not charge the batteries in any char-
ger other than the one specified in the
owner's manual. Using another charger
may damage the battery or cause it to
explode.
x
As part of our commitment to
protecting our
environment and
conserving natural
resources, Uniden
voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH batteries within
the United States. Please call
1-800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.