Uniden D3098 English Owner's Manual - Page 21

volume. All other features of the base and all cordless handsets will not function. ##While the power is out, the base uses a special ringer; you cannot adjust the volume of this ringer. Using the Answering System Answering System Options (Answering Setup) You can change the answering system options from any station. Just open the menu and select Answering Setup. Menu Option What it does Security Code Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see page 24). Ring Time Set the number of rings (2, 4, or 6) before the system answers (see p. 21 about Toll Saver). Record Time Set the amount of time (1 or 4 minutes) callers can leave a message. Choose Announce Only if you don't want the system to let callers leave a message. The maximum record time is 12.5 minutes total. Message Alert Have the base beep every 15 seconds when you have a new message. The alert stops after you listen to all your new messages or if you press any key on the base. Ans. Language Change the language of the system's voice prompts. Call Screen Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see page 24). Answer On/Off Turn your answering system on or off. (To turn your system on or off from the base, just press On/off.) Record Greeting Record an outgoing message (see p. 19) Greeting Options Switch greetings or delete your greeting (see p. 19). Accessing the Answering System With the phone in standby, you can access your system from the base or remotely from any handset. Only 1 handset or the base can access the system at a time. During remote access; The system beeps so you know it's waiting for your next command. You can press the number key shown next to each command instead of scrolling through the screens. 21 - English