Uniden D3098 English Owner's Manual - Page 27

Resetting Stations, Registering a Handset, Adapter and, Battery Information

Page 27 highlights

3. Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers and reconnecting cords. Resetting Stations If you have problems with the base, unplug the base to reset it. Plug it back in after at least a minute. If you have trouble with a cordless handset or if you want to replace one, reset it: 1. Press and hold Flash/exit and Pound (#) at the same time until System Reset displays (about 5 seconds). 2. If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don't have that base anymore, select Base Unavailable. 3. To confirm, select Yes. The handset displays Handset not registered. Registering a Handset If you see a "not registered" message on a handset, you must register it to a base before using it. 1. On the base, open the menu and select Register Handset. 2. On the handset, press and hold Pound (#) until the handset display says Handset Registering (about 2 seconds). 3. Wait until the handset display says Registration Complete (about 30 seconds), then pick up the handset and press END/CLEAR. ##If you don't hear a dial tone or the display says Registration Failed, charge the battery completely, then try again. Adapter and Battery Information AC adapter Base Charger Part number PS-0034 PS-0035 Input voltage 120V AC, 60 Hz Output voltage 7.8V AC @ 450mA 8V AC @ 300mA Use only the supplied AC adapters. Use the proper adapter for the base and any chargers. Do not place the unit in direct sunlight or subject it to high temperatures. Battery pack (with normal use) Part number BT-1025 Capacity 500mAh, 2.4V DC Talk time about 10 hours Standby time about 7 days Battery life about 1 year Replace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover). If you hear a strange beep during a call, check the display. When the battery gets low, the handset shows a low battery alert; recharge the battery. 27 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

27 - English
3. Let dry for at least 3 days. Check for liquid inside the phone before replacing
compartment covers and reconnecting cords.
Resetting Stations
If you have problems with the base, unplug the base to reset it. Plug it back in
after at least a minute.
If you have trouble with a cordless handset or if you want to replace one, reset
it:
1. Press and hold
FLASH/EXIT
and
POUND (#)
at the same time until
System Reset
displays (about 5 seconds).
2. If you still have the base the handset is registered to, select
Deregister HS
, then
select the handset you want to reset. If you don't have that base anymore,
select
Base Unavailable
.
3. To confirm, select
Yes
. The handset displays
Handset not registered
.
Registering a Handset
If you see a “not registered” message on a handset, you must register it to a
base before using it.
1. On the base, open the menu and select
Register Handset
.
2. On the handset, press and hold
POUND (#)
until the handset display says
Handset Registering
(about 2 seconds).
3. Wait until the handset display says
Registration Complete
(about 30 seconds),
then pick up the handset and press
END/CLEAR
.
#
If you don’t hear a dial tone or the display says
Registration Failed
, charge
the battery completely, then try again.
Adapter and
Battery Information
AC adapter
Base
Charger
Part number
PS-0034
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage
7.8V AC
@ 450mA
8V AC
@ 300mA
±
Use only the supplied AC adapters.
±
Use the proper adapter for the base
and any chargers.
±
Do not place the unit in direct
sunlight or subject it to high
temperatures.
Battery pack (with normal use)
Part number
BT-1025
Capacity
500mAh, 2.4V DC
Talk time
about 10 hours
Standby time
about 7 days
Battery life
about 1 year
±
Replace the battery when the talk
or standby time becomes noticeably
reduced. For replacements, call the
Parts Department (see the front
cover).
±
If you hear a strange beep during a
call, check the display. When the
battery gets low, the handset shows
a low battery alert; recharge the
battery.