Uniden DATA2000 English Owners Manual - Page 91
Set TCP/IP Header Compression Mode.
View all Uniden DATA2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
v Uniden Data 2000 Wireless CDPD PC Card AT Command Syntax Description of Command AT SWVER? or ATI1 Read the software code version downloaded in the Modem from the System Table. Data encrypted version: U-D_1000 (Version #) (Date Time) Non encrypted version: No Encrypt Version #)(Date Time) Response: U-D_1000 (Version #) (Date Time) No Encrypt (Version #) (Date Time) AT VERBOSE? Read 1 for verbose or 0 for terse modes from the System Table. Response: Verbose 0 or Verbose 1 Verbose 0 means terse mode is on, Verbose 1 means verbose mode is on. AT CLRAUTH NEI n Clear Authentication parameters for NEI #n. WARNING: Check with your service provider before taking this step. Response: OK AT CMPR Set TCP/IP Header Compression Mode. (On/Off) Response: OK AT FC Set flow control mode (On/Off). (When hardware flow control is enabled, the Modem generates CTS when it is able to accept characters, otherwise it will de-assert CTS. The Modem inhibits output to the serial line when the host de-asserts RTS; otherwise it will permit output.) Response: OK Uniden Data 2000 Installation and Operation Manual D-9