Uniden DATA2000 English Owners Manual - Page 94
AT Commands/Reading Statistics and Status, AT Commands/Command/Control
View all Uniden DATA2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
v Uniden Data 2000 Wireless CDPD PC Card D.8 AT Commands/Reading Statistics and Status AT Command Syntax Description of Command AT$RSSI Read the current RSSI value. Response: CFG: Current RSSI: n D.9 AT Commands/Command/Control AT Command Syntax Description of Command AT Verifies that the AT interface is working. Response: OK AT$CHAN_< > Forces modem to stay on one or a limited Set of ten RF channels. Calling with no parameters will return the current setting n = defining parameter Note: If this command is entered with no parameters, the list of fixed channels is returned. To clear the list of fixed channels, enter AT$CHANSET CLEAR. To save the list of channels to non-volatile memory, type AT$CHANSET WRITE. Example: If you want the modem to use only channel 713 and 705, type AT$CHANSET 713 705, then AT$CHANSET WRITE, then AT RESET. Response: list of any channel(s) set by at$chanset write, OK D-12