Uniden DCT5280 English Owners Manual - Page 15
B. Install the AA batteries into the handset, Battery use time per charge, Low battery alert
View all Uniden DCT5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED B. Install the AA batteries into the handset Charge the batteries for at least 17-20 hours before plugging the phone line into your base unit. 1) Press down on the battery cover release and slide the cover down until it comes off. 2) Install the batteries supplied with your phone, observing correct + - polarity. 3) Securely close the battery compartment cover by sliding it up until it snaps into place. The DCT5280 series will only work with "AA" Ni-MH rechargeable batteries. If you use any other type of batteries, the display will show "Use rechargeable battery only". Battery use time (per charge) Fully charged (17-20 hours charge time) • Up to 7 hours continuous use • Up to 14 days when the handset is in the standby mode Low battery alert When the batteries are very low and need to be charged, the phone is programmed to eliminate functions in order to save power. The batteries need to be charged when: - The battery icon appears. - "Low Battery" appears in the display. Low Battery If the phone is in the standby mode, none of the keys will operate. If you are on a call, complete your conversation as quickly as possible, and return the handset to the cradle. • Use only "AA" rechargeable Ni-MH batteries. Do Not use Alkaline, Lithium, or non-rechargeable batteries. To insure maximum performance and safety, use replacement batteries specifically matched for this phone, contact www.uniden.com. Using incorrect batteries could damage or limit the performance and could cause bodily injury. • Recharge your phone on a regular basis by returning the handset to the cradle after each phone call. G E T T I N G S T A R T E D [ 13 ]