Uniden DCT648-2 English Owners Manual - Page 64
Remote Operation
UPC - 050633320112
View all Uniden DCT648-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
THE INTEGRATED ANSWERING DEVICE note •Time stamp will not be heard until you have set the time. See "Setting the Time" on page 54. •The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds. •If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby. •During the remote operation, appears on the base. •If the answering system is recording an incoming message, the recording operation is canceled when you start remote operation. •For your convenience a remote operation card is provided for you to use while away from home (refer to page 83). Remote Operation You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset). Additionally, you can turn On or Off your answering system remotely. Remote access away from home You can operate your answering system from a remote location using any touch-tone telephone. 1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about 10 rings and sounds a series of beeps. 2) During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code" on page 25 or 54). 3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero". You will hear a beep. 4) Enter a command within 15 seconds, each command there after must be entered within 2 seconds. You may select a command from the following chart: Command Function 0 then 1 Repeat a Message* 0 then 2 Playing incoming Messages 0 then 3 Skipping a Message 0 then 4 Deleting a Message 0 then 5 Stop Operation Command Function 0 then 6 Answering System On 0 then 7 Memo Record/Stop** 0 then 8 Greeting Message Record/Stop** 0 then 9 Answer System Off 1 then 0 Help Guidance [62] THE INTEGRATED ANSWERING DEVICE www.uniden.com