Uniden DCT6485 English Owners Manual - Page 17
Mounting the Base Unit on a Wall
UPC - 050633320150
View all Uniden DCT6485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Snap the wall mount adapter into the notches on the base top. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC wall outlet. 5) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown. 6) Plug the telephone line cord into the telephone outlet. 7) Raise the antenna to a vertical position. 8) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. www.uniden.com DO NOT use an AC outlet controlled by a wall switch. GETTING STARTED [15] GETTING STARTED