Uniden DCT6485 English Owners Manual - Page 64

Remote Operation

Page 64 highlights

Remote Operation THE INTEGRATED ANSWERING DEVICE note •The time stamp will not be heard until you have set the time. See "Setting the Time" on page 54. •The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds. •If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby. •During the remote operation, appears on the base. •If the answering system is recording an incoming message, the recording operation is canceled when you access your answering system remotely. •For your convenience a remote operation card is provided for you to use while away from home (refer to page 83). You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset). Additionally, you can turn On or Off your answering system remotely. Remote access away from home You can operate your answering system from a remote location using any touch-tone telephone. 1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about 10 rings and sounds a series of beeps. 2) During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code" on page 24 or 54). 3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep. 4) Enter a command within 15 seconds, each command there after must be entered within 2 seconds. You may select a command from the following chart: Command Function 0 then 1 Repeat a Message* 0 then 2 Playing incoming Messages 0 then 3 Skipping a Message 0 then 4 Deleting a Message 0 then 5 Stop Operation Command Function 0 then 6 Answering System On 0 then 7 Memo Record/Stop** 0 then 8 Greeting Message Record/Stop** 0 then 9 Answer System Off 1 then 0 Help Guidance [62] THE INTEGRATED ANSWERING DEVICE www.uniden.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

[62] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Remote Operation
You can check, play, or delete messages, even record a new greeting message from a remote
location (when you are away from home, or from another room using a handset).
Additionally, you can turn On or Off your answering system remotely.
Remote access away from home
You can operate your answering system from a remote location using any
touch-tone telephone.
1) Call your telephone number and wait for the system to answer. If the answering system is
off, it will answer after about 10 rings and sounds a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is off),
press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code" on page 24
or 54).
3) The answering system announces the current time and the number of messages stored in
memory. You hear "To play incoming messages, press zero-two. For help, press one-zero."
You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be entered within 2
seconds. You may select a command from the following chart:
Command
Function
Command
Function
0
then
1
Repeat a Message*
0
then
6
Answering System On
0
then
2
Playing incoming Messages
0
then
7
Memo Record/Stop**
0
then
3
Skipping a Message
0
then
8
Greeting Message Record/Stop**
0
then
4
Deleting a Message
0
then
9
Answer System Off
0
then
5
Stop Operation
1
then
0
Help Guidance
•The time stamp will not
be heard until you have
set the time. See
"Setting the Time" on
page 54.
The system will only
playback messages for
four minutes and then it
returns to the command
waiting mode. To
continue playing your
messages, press 0 then 2
again within 15 seconds.
•If you enter an incorrect
PIN code three times,
you will hear a beep and
the system will return
to standby.
•During the remote
operation,
appears
on the base.
•If the answering system
is recording an
incoming message, the
recording operation is
canceled when you
access your answering
system remotely.
•For your convenience a
remote operation card is
provided for you to use
while away from home
(refer to page 83).
note
THE INTEGRATED
ANSWERING DEVICE