Uniden DECT1580 English Owners Manual - Page 53
Wall plate, Removing the wall-mount bracket - wall mount
UPC - 050633271902
View all Uniden DECT1580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Place the mounting slots over the pins on the wall plate. Slide the base down to lock it into place. Removing the wall-mount bracket At the bottom of the base, pinch the two "nose" of the wall-mount bracket as shown, and then slide the bracket away from the base. Wall plate (To AC outlet) Note: Mounting the phone directly on the wall • Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material. • Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 /15 16 inches apart. • Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone. • Align the mounting slots over the screws and slide the base down into place as shown above. 53 Wall Mounting the Base