Uniden DECT1580 English Owners Manual - Page 58

Troubleshooting When you have this problem... I can't get two handsets to talk to an outside caller. The answering system does not work. The answering system does not record any messages. The answering system doesn't say what time messages were recorded. Messages are incomplete. I can't hear base or handset speaker during call screening or message playback. I can't access answering system from a remote phone. Try... • Checking to see that there are not two handsets already using the conference feature (see page 38). • Making sure another handset is not in Privacy Mode (see page 40). • Making sure both handsets are registered to and currently connected to the same base (see pages 14 and 15). • Checking the AC adapter connection (see page 8). • Checking to see if the answering system is turned on (see page 47). • The memory may be full. Delete some or all of the saved messages (see page 49). • Checking to see that the message record time is not set to announce only (see page 45). • Checking to see if you have set the time (see page 23). • The incoming messages may be too long. Ask callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages (see page 49). • Adjusting the speaker volume on the base or handset (see pages 36 and 37). • Checking to see if the call screen feature is set to on (see page 46). • Checking to see if you are using the correct PIN number (see page 50). • Checking to see if the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, try using a different touch-tone phone. 58