Uniden DECT2088 English Owners Manual - Page 14
Using Multiple Bases - 2 manual
UPC - 050633271223
View all Uniden DECT2088 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing the Phone Using Multiple Bases The handsets supplied with your phone (or any DCX200 accessory handsets) can be registered to a total of four different bases. Compatible bases include the DECT2060, DECT2080, DECT2085, DECT2088, and DECT3080 models. Once your handset is registered to more than one base, you can set the handset to search automatically the available base, or you can select manually which base the handset should connect to (for example, if you have one base with an answering machine, you can tell the handset to connect that base to check messages). Registering the Handset to Another Base ) Make sure the handset battery is fully charged. 2) To register a handset to DECT2060, DECT2080 or DECT3080 base: • Disconnect the base AC adapter. Then press and hold [find hs] or [find] while you reconnect the adapter.. Keep pressing [find hs] or [find] until the charge LED starts to blink. To register a handset to DECT2085 or DECT2088 base: • With the phone in standby, press [Menu/Select] on the base. Move the cursor to select the REGISTER HANDSET menu, and then press [Menu/Select]. HANDSET REGISTERING will appear. 3) On the handset, Press [Menu/Select]. Select the REGISTER BASE menu. HANDSET REGISTERING will appear in the display. 4) Wait approximately thirty seconds. "REGISTRATION COMPLETE" will be displayed to indicate the handset has been registered to the base and a handset ID will be automatically assigned. If the display shows REGISTRATION FAILED, repeat the process again. 13