Uniden DECT4066 English Owners Manual - Page 22
Using Your Phone
UPC - 050633272800
View all Uniden DECT4066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Using Your Phone Working with Two Lines When performing common tasks, you can let the station use the primary line, or you can manually choose a particular line for each task. Using the primary line makes common tasks much simpler, but you will need to assign a primary line to each station (see below). If you want to... From a handset From a handset From the base speakerphone speakerphone make a call: Dial the number, then - with the primary line Press TALK/FLASH. Press SPEAKER. - by choosing a line Press LINE1 or LINE2.* answer a call When a call comes in, the soft keys blink to tell you which line is ringing. - with the primary line Press TALK/FLASH. Press SPEAKER. - by choosing a line Press the soft key for the line you want to answer.* hang up Press END or return the handset to the cradle. Press SPEAKER. switch between the speaker and earpiece Press SPEAKER. Not available put a call on hold Press INTERCOM/HOLD; the soft key blinks to remind you the line is on hold. To return to the call, press the soft key (LINE1 or LINE2) for the holding line. switch lines during a call (automatic hold) Press the soft key for the other line; the current call is automatically put on hold (see above). To return to the call, press the soft key for the holding line. mute the microphone Press MUTE. Press MUTE/EXIT. during a call Press again to turn the microphone back on. mute the ringer for While the phone is ringing, this call only press END. press MUTE/EXIT. * On the handset, press SPEAKER to switch to the speakerphone. Assigning a primary line You can assign a primary line to each station; the station connects to its primary line whenever it goes off hook (that is, when you press TALK/FLASH or SPEAKER). Whenever you want, you can bypass the 20