Uniden DECT4066 English Owners Manual - Page 7
Test the Connection - 2 line phone
UPC - 050633272800
View all Uniden DECT4066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Test the Connection Pick up the handset from the base and press TALK. The phone should pick up line 1 automatically and change the display to show Talk , and you should hear a dial tone. When you get a dial tone, make a test call; press END to hang up. If... Try... the base display says Check or you don't hear a dial tone checking the connection between the base and the phone jack: make sure the cord is connected to TEL LINE 1/2. you keep hearing a dial tone setting line 1 to pulse dialing (see page 6). there's a lot of noise or static see page 38 for tips on avoiding interference. the handset display says Unavailable resetting the handset (see page 40). If you have accessory handsets, try using a different handset for the test call. Test Line 2 Once you can make calls on line 1, make a test call on the second line. Pick up the handset and press the unmarked key under LINE2. You should hear a dial tone and the display should show Talk . SUN 12:00A Handset #1 .+0' /'07 .+0' If... Try... the display says Check or you don't hear a dial tone checking the connection between the base and the phone jack: if you have a separate jack for each line, make sure the cord is connected to TEL LINE 2. you keep hearing a dial tone setting line 2 to pulse dialing (see page 6). Test any accessory handsets the same way. If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 40). 5