Uniden DECT4096 English Owners Manual - Page 5

4. Place the mounting slots over the pins on the wall plate, and slide the base down to lock it into place. DESK DESK WWAALLLL WALL Test the Connection Pick up the corded handset from the (To telephone jack for second line.) base. The phone should pick up line 1 automatically and change the display to show Talk , and you should hear a dial tone. When you get a dial tone, make a test call. If... Try... the display says Check checking the connection between the base and the phone jack: make sure the or you don't hear a dial tone cord is connected to Tel Line 1/2. you keep hearing a dial tone setting line 1 to pulse dialing (see page 4). there's a lot of noise or static see page 43 for interference. tips on avoiding Test Line 2 Once you can make calls on line 1, make a test call on the second line. Pick up the corded handset and press the unmarked key under Line2. You should hear a dial tone and the display should show Talk . SUN 12:00A 12/31/08 LINE1 MENU 0 0 LINE2 If... Try... checking the connection between the the display says Check base and the phone jack: if you have a or you don't hear a dial tone separate jack for each line, make sure the cord is connected to Tel Line 2. you keep hearing a dial tone setting line 2 to pulse dialing (see page 4).