Uniden DECT4096 English Owners Manual - Page 7
Connect the charger, Test the connection, Charge all handsets completely about 15 hours - battery
UPC - 050633272077
View all Uniden DECT4096 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Place the cover over the battery compartment and slide it up into place. Connect the charger 1. Connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.) 2. Plug the other end of the adapter into a standard 120V AC power outlet. AC IN 8V 3. Place each handset in a charger with the display facing forward. The charge light should turn on. If... Try... the charge - reseating the handset. light doesn't - checking the AC adapter connection. turn on - seeing if the outlet is controlled by a wall switch. Charge all handsets completely (about 15 hours) before using them. Test the connection Pick up each handset and press Talk. You should hear a dial tone, and the display should say Talk. (Press End to hang up.) If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 44).