Uniden DFR9 English Owner Manual - Page 19

HOW DO I ...? Change the screen's brightness Change the screen's brightness during alarms Turn bands on and off Set a user mark Delete a user mark Delete ALL user marks TRY THIS... Press and hold MUTE/DIM. The DFR9 announces the brightness level (Auto, Bright, Dim, Dimmer, Dark, or Off) as it changes to that level. Press and hold the key again to cycle between the brightness levels. The Dark Mode menu lets you adjust the OLED brightness when an alarm is detected. 1. Press MENU, then press VOL+ until Dark Mode displays. 2. Press MENU to cycle through options for alarm display brightness. 3. Press VOL+ to return to the menus. Press MENU and cycle through the menu options until the band you want to turn off or on displays. Press MENU again to change that band's status. Press MARK to create a user mark when you are at a location where there is normally some type of radar. The DFR9 announces "User mark logged." The DFR9 will announce when you approach user marks. The DFR9 can register up to 500 user marks. There are two ways to delete User Marks: • Press MARK again at that location to delete the user mark. • Press Menu, then VOL+ until Delete All Users? displays. Press Menu to delete all user marks. The DFR9 does NOT ask for confirmation before deleting user marks. Press and hold MARK to delete all user marks. The DFR9 DOES ask for confirmation before deleting all user marks. Press MARK again to confirm. -19 -