Uniden DXAI4288-2 English Owners Manual - Page 10
C. Connect the Main Base and Charging Cradle, and Charge the Handsets, DC IN 9V, TEL LINE - phone
UPC - 050633300459
View all Uniden DXAI4288-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INSTALLING THE PHONE ! •Use only the supplied AD-314 AC adapter for the main base and AD-310 or AD-1010 for the charging cradle. Do not use any other AC adapter. •Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. C. Connect the Main Base and Charging Cradle, and Charge the Handsets 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Place one handset in the main base and the other in the charging cradle with the keypad facing forward. 3) Make sure the charge/in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts. • Connect each AC adapter to a continuous power supply. • Place each cradle close to the AC outlet to avoid long extension cords. 4) Charge your handsets at least 15-20 hours before plugging the phone line. 5) Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular [9] INSTALLING THE PHONE www.uniden.com