Uniden DXAI4288-2 English Owners Manual - Page 59
TROUBLESHOOTING [58], speaker during call monitoring
UPC - 050633300459
View all Uniden DXAI4288-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TROUBLESHOOTING Symptom Suggestion The handset doesn't communicate with the main base • Re-register both handsets (see page 13). or the other handset. No 3-way conversation. • Only one handset at a time can talk with an outside caller. To allow the other handset to talk to the caller, transfer the call. The answering system does not • Make sure the AC adapter is plugged into wall outlet. work. • Make sure the answering system is turned on. The answering system does not • Set the record time to either the one minute or four minute option. record any messages. • The memory may be full. Delete some or all of the saved messages. Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages. After a power failure, the outgoing message is deleted. • Record your personal outgoing message again. The default message should remain. No sound on the main base speaker during call monitoring or message playback. • Adjust the speaker volume on the main base. Cannot access remote call-in features from another touchtone phone. • Make sure you're using the correct PIN code. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your messages. www.uniden.com TROUBLESHOOTING [58]