Uniden DXAI4588-2 English Owners Manual - Page 14

Symptom Suggestion • Move the handset and/or base away from metal objects or appliances and try again. The audio sounds • Press [select/channel] during a call to change the weak and/or phone's channel and help eliminate background scratchy. noise. • Make sure that the handset is not too far from the base. Can't make or receive calls. • Re-register both handsets. • Check both ends of telephone cord. • Make sure the AC adapter is plugged into the base and wall outlet. • Disconnect the AC adapter for a few minutes, then reconnect it. • Change the digital security code. • Make sure that the handset is not too far from the base. • Check the dialing mode used by your telephone company. The handset doesn't ring or receive a page. • Re-register both handsets. • The battery pack may be weak. Charge the battery for 15-20 hours. • The handset may be too far away from the base. • Place the base away from appliances or metal objects. • Change the digital security code. • Check the battery pack to ensure there is a secure connection. • Make sure ringer volume isn't set to "off." Severe noise interference. • Press [select/channel] during a call to change the phone's channel and help eliminate background noise. • Keep both handsets away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move the base to another location or turn off the source of interference. The Caller ID does not display. • The call was answered before the second ring. • The call was placed through a switchboard. • Charge the handset. • Your Caller ID service may not be active; contact your local telephone service provider. A handset is not working. • Make sure the battery pack is connected to the handset and fully charged. • Re-register the non-functional handset. Unavailable message is displayed on the LCD screen of the handset. • Make sure another handset is not already in use. Both handsets cannot be in talk at the same time. • Place the handset in the base for at least five seconds to re-register to the base. • Make sure the handset is not too far from the base when trying to use. The handset doesn't communicate with • Re-register both handsets. the base or the other handset. No three-way conversation. • Only one handset at a time can talk with an outside caller. To allow the other handset to talk to the caller, transfer the call. The answering machine does not work. • Make sure the AC adapter is plugged into wall outlet. • Make sure the answering machine is turned on. The answering machine does not record any messages. • Set the record time to either the one minute or four minute option. • The memory may be full. Delete some or all of the saved messages. Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages. After a power failure, the • Record your personal outgoing message again. The outgoing message default message should remain. is deleted. No sound on the base speaker during call monitoring or message playback. • Adjust the speaker volume on the base. Cannot access remote call-in features from another touchtone phone. • Make sure you're using the correct PIN code. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your messages.