Uniden DXI3286-2 English Owners Manual - Page 18

• If your calling area requires 10-digit dialing, do not program this option. • Make sure your battery pack is fully charged before choosing the dialing mode. To enter your Area Code If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. 1) When the phone is in standby mode, press and hold the cid/menu key. The Caller ID setting screen appears. 2) Press the vol/ring/ key to move the pointer to "Area Code". 3) Press the select/channel key. 4) Use the number keys (0 - 9), or the delete/transfer key to enter the 3-digit area code. 5) Press the select/channel key. A confirmation tone sounds and the displayed area code is entered. 6) Press the end key or return the handset to the base unit or charging cradle to complete the setting. The handset returns to the standby mode. When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the delete/transfer key and number keys to enter the new area code. Then press the select/channel key. A confirmation tone sounds. To complete the setting, press the end key or return the handset to the base unit or charging cradle. Choosing the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems (such as those in rural areas) still use pulse dialing. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: [ 18 ] G E T T I N G S T A R T E D www.uniden.com