Uniden DXI3286-2 English Owners Manual - Page 9

B. Install the rechargeable battery packs into both handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the base unit or charging cradle. Charge the handset battery packs for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection. 3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. www.uniden.com • Use only the Uniden (BT-905) rechargeable battery pack supplied with your cordless telephone. • Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a.m. to 5:00 p.m. or on line at www.uniden.com • Place the second handset in the charger with the keypad facing forward for 15-20 hours before use. GETTING STARTED [ 9 ] GETTING STARTED