Uniden EXAI978 English Owners Manual - Page 59

ADDITIONAL I N F O R M AT I O N Symptom Suggestion The Caller ID does not display. • The handset was picked up before the second ring. The Caller ID is displayed between the first and second ring. • The call was placed through a switchboard. • Call your local telephone company to verify your Caller ID service is current. • Charge the handset. The answering system does not • Make sure the base unit is plugged in. work. • Make sure the answering system is turned on. The answering system does not • Set the record time to either the one minute or four minute option. record any messages. • The memory may be full. Delete some or all of the saved messages. Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages. After a power failure, the • Record your personal outgoing message again. The default message should remain. outgoing message is deleted. No sound on the base unit • Adjust the speaker volume on the base unit. speaker during call monitoring or message playback. Cannot access remote call-in features from another touchtone phone. • Make sure you're using the correct PIN code. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your messages. If you still have a problem. • Call our customer hotline at 1-800-297-1023. www.uniden.com A D D I T I O N A L I N F O R M A T I O N [ 59 ]