Uniden EXI3226 English Owners Manual - Page 11

GETTING STARTED C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and place the handset on the base unit as shown. Remove the beltclip, if attached for face up charging. (For wall mounting, see "Mounting the Base Unit on a Wall", on page 13 and 14). 3) Raise the antenna to a vertical position. 4) Make sure the charge/in use LED is illuminated. If the LED is not illuminated, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts. • Connect the AC adapter to a continuous power supply. note • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. ! • Use only the supplied AD-314 AC adapter. Do not use any other AC adapter. • Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. note The handset can be placed face up or face down on the base for charging. www.uniden.com G E T T I N G S T A R T E D [ 11 ]