Uniden EXI7926 English Owners Manual - Page 18

Basics (continued) Flash and Call Waiting The flash function on the base and handset are independent of each other. If you have Call Waiting service and a call waiting tone sounds, press flash (or delete/flash on the handset) to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash (or delete/flash on the handset) again. status memory page/int'com redial/p flash call id dn up delete hold conf int'com flash sel/vol chan redial/p Note The flash feature does not function when line 1 and line 2 are on a conference call. (See 3-way conferencing and 4-way conferencing, pages 22 and 23.) Last number redial The redial key redials the last number dialed. The redialed number can be up to 32 digits long. 1 Handset Press line 1 or line 2 , then press redial/p . Or press redial/p , then press line 1 or line 2 . hold conf int'com flash sel/vol chan redial/p 2 Base Press line 1 or line 2 , then press redial/p . status memory page/int'com redial/p flash • If any key is pressed before redial/p , the last number will not redial. Tip The EXI 7926 has two independent last number redial memories; one in the handset, the other in the base. 18