Uniden EXL8900 English Owners Manual - Page 19

Storing mixed tone/pulse number If your have selected pulse dialing, you can store a mixed tone/pulse number (up to 20 digits) for memory dialing. 1 Remove the handset from the base and press mem . The talk/batt LED flashes and you hear a beep. 2 Enter the number to be dialed in pulse mode. 3 Press the */tone button on the handset. The * /tone button counts as one digit and also enters a pause. 4 New enter the number(s) to be dialed in tone mode. 5 Press mem and a number (0-9) on the keypad for the memory location you wish to use. You will hear a long beep and the talk/batt LED goes out. If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial. Dialing a stored number To dial a phone number stored in memory, press talk , then press mem and the memory location (0-9). Your phone will dial the stored number. talk mem If you press LongDst instead of talk , the LDM will be activated. (See page 14 for details.) 16