Uniden EZAI2997 English Owners Manual - Page 23

To... answer the call mute the call screen without answering From the base Not available Press Play/stop. From a handset Press Talk. Press Flash/exit or return the handset to the cradle.  If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.  Only one handset at a time can screen calls. If another handset is screening the call, the handset beeps and returns to standby. Using the System While You're Away from Home You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code. Programming a security code ) With the phone in standby, open the menu from any handset. 2) Select Ans. Setup, then select Security Code. ) Use the number keypad to enter a two-digit security code (01 to 99). Press select/Menu when you're finished. Remember to make a note of your new security code! Dialing in to your system ) Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after about ten rings and sound a series of beeps instead of your greeting.) 2) During the greeting (or beeps), press 0 and immediately enter your security code. (You have 3 tries to enter you security code: if you enter it wrong 3 times, the system hangs up and returns to standby.) ) The system announces the current time, the number of messages stored in memory, and a help prompt. Then it starts beeping intermittently to let you know it's waiting for your command. ) When you hear the intermittent beeping, enter a command from the chart to the right. If you don't press any keys for 15 0-1 Repeat message 0-2 Play message 0-5 Stop playback 0-6 Turn the system on seconds, the phone 0-3 Skip message 0-9 Turn the system off will hang up and return to standby. 0-4 Delete message 1-0 Hear help prompts 21