Uniden EZI996 English Owners Manual - Page 24
select, delete/channel - instructions
UPC - 050633152423
View all Uniden EZI996 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
If the next character uses the same number key, you must press the #/ key to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set. 4) Enter a name according to the instructions below, then press the select key. If no name is required, go to step 5. • The name can be up to 14 characters. • Use the #/ and /tone/ keys to move the cursor to the desired location. • Use the delete/channel key to delete characters as needed. • Press and hold the delete/channel key to delete all the characters. Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key. If you make a mistake while entering a name Use the /tone/ or #/ key to move the cursor to the incorrect character. Press the delete/channel key to erase the wrong character. Then enter the correct character. To delete all characters, press and hold the delete/channel key. For example, to enter Movies. 1) Press 6. Then press the #/ key to move the cursor to the right. 2) Press 6 six times. 3) Press 8 six times. 4) Press 4 six times. 5) Press 3 five times. 6) Press 7 eight times. 24 USING THE SPEED DIAL MEMORY www.uniden.com