Uniden LRD950 User Manual - Page 6

INSTALL AND TURN ON LRD950 You can mount the LRD950 on the windshield (bracket included) or on the dashboard (hook and loop tape included). INSTALL Windshield When you mount the LRD950 on the windshield, mount it in the middle of the windshield between the driver and passenger. Be sure there are no obstructions and that there is a clear view through the back window. 1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield. 2. Slide the unit onto the bracket until it clicks into place. 3. Plug the power cord into the LRD950 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 4. The LRD950 automatically turns on and runs through a self test cycle. Release the LRD950 from the bracket by pressing the Eject key on top of the detector. Dashboard The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard. 1. Attach the unit to the dashboard using the hook and eye fastener tape. 2. Plug the power cord into the LRD950 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 3. The LRD950 automatically turns on and runs through a self test cycle. Pull the bracket from the dashboard, separating the hook and loop tape. TURN ON 1. Inert the power cord's RJ45 connector into the LRD950s power jack. 2. Insert the power cord's cigarette lighter adapter into the vehicle's cigarette lighter port. 3. The LRD950 automatically turns on and runs through a systems check. WHAT'S IN THE BOX LRD950 Radar Detector Windshield Mounting Bracket 12V DC Power Cord with RJ45 Connection Not Shown: Hook and Loop Fastener Tape Spare Fuse for DC Power Cord Quick Start Guide - 6 -