Uniden LRD950 User Manual - Page 9

MENU ITEM Ka Band Laser POP Mode K Filter Scan Display Speed Unit Auto Mute Backlight Quiet Ride Limit Speed GMT DST BAT Warning BAT Saver Selt Test Factory Reset WHAT IT DOES SETTINGS Turn off to have the detector ignore Ka Band On frequencies. Off Turn off to have the detector ignore lasers. Detects POP transmissions (very brief transmissions, too On fast for some detectors to hear). Off Filters noise from the K band to prevent false detections. On Off If Scan is turned on, a dot displays and moves back and On forth on the screen to indicate scanning status.. Off Lets you set the following: xx Speed mph, km/h xx Compass (8 points) NW, W, etc xx Voltage V xx Altitude m, ft. xx Off Sets the speed measurement type. Miles per Hour (mph) Kilometers per hour (KPH) Auto Mute reduces alarm level to 1 after 3 seconds On and returns to normal operation (Auto Mute = OFF) Off 10 seconds after the alert ends. If the same or another alarm sounds within the 10 second period, Auto Mute remains at level 1. The unit returns to normal operation (Auto Mute = OFF) if a different band is detected during Auto Mute = ON mode. Turns the backlight on and off. On Press and hold MUTE/DIM to select a brightness level. Off Mutes laser and radar alarms when you drive under the 5 to 50 in 5 mph (10 to 80 in 10 speed limit you set here. kp/h) intervals Sounds an alarm when the vehicle reaches a specific speed. 50 to 100 in 5 mph (80 to 160 in 10 kp/h) intervals Sets time zone according to Greenwich Mean Time (GMT). Most common time zone settings for North America are: xx GMT-05:00 - Eastern Standard xx GMT-06:00 - Central Standard xx GMT-07:00 - Mountain Standard xx GMT-08:00 - Pacific Standard xx GMT-09:00 - Yukon Standard xx GMT-10:00 - Alaska-Hawaii Standard Daylight Saving Time On Off Issues a warning if the vehicle battery power drops On below 11V. Off Turns off power to the LRD950 if the speed stays at 0 or On if the GPS is not connected for more than an hour. Off Runs a self diagnostic test on the unit to check for faults. On Off Resets all settings except GMT to the factory defaults. NA There is no confirmation request for reset. - 9 -