Uniden MC1020 English Owners Manual - Page 12
Operation
View all Uniden MC1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation 1. Turn the unit on by rotating the VOL control clockwise. 2. Adjust the SQUELCH control counterclockwise until you hear background noise, and then turn it clockwise until the noise just disappears. Triple Watch Triple Watch monitors Channel 16 and Channel 9 for activity every two seconds while scanning or monitoring. To activate Triple Watch, press and hold 16/9 until two short beeps occur. The indicator appears on the LCD panel, indicating Triple Watch mode is in effect. If a signal is received on either Channel 16 or Channel 9, the radio remains on that channel until the signal ends . Press and hold 16/9 until the tone sounds to cancel Triple Watch Mode. Manual Tuning To manually select a channel, press the CHAN selector buttons (up/down) to select the desired channel. Weather Channels are located on Channels 0 - 9. Communication Channels are located on Channels 01 - 28 and 60 - 88. Instant Channel 16/Channel 9 Communications To access instant Channel 16 or Channel 9 communications, press 16/9. This overrides the channel selected with the CHAN selector buttons or any scanning activity. The Channel Display indicates the unit is on Channel 16. Press 16/9 again to access Channel 9 communications. Press and release 16/9 a third time to release the switch (Off). The transceiver will return to the channel selected prior to accessing instant Channel 16/Channel 9 communications. The Channel Display will indicate the selected channel. 9