Uniden MHS050-2 Owners Manual - Page 16
Monitor
View all Uniden MHS050-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Storing Scanned Channels 1. Select the channel you want to store by pressing CH or CH . 2. Press and hold MEM. MEM displays and you hear a double beep. 3. To remove channels from Memory, press and hold MEM once more. A double beep sounds and MEM disappears. MEM LO Monitor 1. Press MON to start monitoring one channel with fixed (open) squelch. 2. Press and hold MON for 2 seconds to hold the monitor status on. All channel indicators will start to flash. 3. Press MON again to release the monitoring LO status. Monitor is not available in Scan or Triple Watch modes. NOTE Drop-out Delay While scanning, the radio stops on channels when it receives a signal. When the received signal is over, the unit provides a drop-out delay of 2 seconds for the return of the signal. After 2 seconds, if the signal does not return, the radio resumes scanning. Battery Save This feature extends the battery life by switching the receiver circuit power on and off. Battery Save automatically activates during standby mode (RX mode without signal). Backlighting The Liquid Crystal Display (LCD) is backlit for easy viewing at night or in low light situations. Backlighting automatically E-16 Uniden MHS050-2 Owner's Manual