Uniden MHS126 English Owner's Manual - Page 17

ŠŠ You must have at least two channels in memory to start a scan. However, you cannot save marine channel 70 or Weather channels. ŠŠ You cannot transmit while in Scan mode. ŠŠ To save a channel into memory, select the channel, then press MEM/SOS. The MEM icon displays whenever you tune to that channel. ŠŠ To remove a channel from memory, set the radio to that channel, then press MEM/SOS. The MEM icon no longer displays. ŠŠ When the radio stays on a channel, press Channel Up to leave that channel and resume scanning. ŠŠ To end the scan, press the SCAN/DUAL button again; the radio remains on the last scanned channel. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while in Scan mode, the radio checks the most recently/used weather channel every seven seconds, then continues scanning the next channel in memory: Memory Channel Scan 08 10 11 12 13 14 15 17 20 24 25 Every 7 seconds, the radio checks the last-used weather channel, then scans the next channel. WX Alert wx Watch on Scan mode with Triple Watch or Dual Watch If you activate Triple Watch while operating in Scan mode, the radio checks channels 16 and 9 every two seconds, Uniden MHS126 Radio Owner's Manual E-13