Uniden MHS126 English Owner's Manual - Page 23
Mounting the Charger, Charging the Battery
View all Uniden MHS126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Mounting the Charger You can mount the charger on any flat surface. 1) Use the two holes at the base of the charger as a template to mark the drill holes. 2) Using a 1/8-inch (or 3 mm) drill bit, drill two holes 1/2 inch (13mm) deep. 3) Use the provided screws to attach the charger to the surface. Charging the Battery Your radio includes a charger and a rechargeable battery pack. Place your radio in the charger with the display facing forward. Make sure that the CHARGE LED on the charger turns orange. Cautions: Use only the battery and charger supplied with this radio. Using a different charger or battery can damage the radio and create a risk of fire or shock. The charger is not waterproof. If the charger falls into the water, unplug it before attempting to remove it from the water. After you remove the charger from the water, please contact our Customer Care Line. Wipe off dirt or shake water from your radio before placing in the charger if your radio gets dirty or wet. Uniden MHS126 Radio Owner's Manual E-19