Uniden MHS235 English Owner's Manual - Page 31

PUtting tHe raDiO intO stanDBY

Get Uniden MHS235 PDF manuals and user guides View all Uniden MHS235 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

same way you enter directory entries (see page 22). Enter all nine digits and press DISP/ENT H/M/L. 4. The radio displays the MMSI number you are about to contact and asks you to confirm. If you want to request the position of the displayed MMSI number, select Send. To cancel the request, select Exit. 5. When the other station responds, the radio displays the MMSI number, the longitude, and the latitude of the other station. If your radio is connected to a chartplotter through the NMEA OUT connection (see page 34), the position information will also be displayed on the plotter screen. 6. If the other station does not have valid GPS data, the radio displays No Position. Position Reply When another station requests your current position, different screens display depending on whether you set Position Reply to Auto or Manual. If Position Reply is set to Auto: Position Request 16 Harris 06/20 11:00 Routine USA Exit [CLR] If Position Reply is set to Manual: Position Request Harris 16 Reply USA Send Exit [ENT] [CLR] No action is necessary. Select Send to send a reply or Exit to reject the request. Position Send If you are requesting assistance or using an all ships call to give a safety warning, you can send your current position so other stations know where you are: 1. Press and hold MENU/CALL to display the Call menu. 2. Select Position Send. 3. The radio displays the names listed in your directory; use Channel Up and Channel Down to choose the directory entry you want to contact and press DISP/ENT H/M/L. If you want to contact a station that is not in your directory, select Manual. The radio prompts you to enter the MMSI number you want to call. Enter the MMSI number the same way you enter directory entries (see page 22). Enter all nine digits and press DISP/ENT H/M/L. 4. The radio displays the MMSI number you are about to contact and asks you to confirm. If you want to transmit your position to the displayed MMSI number, select Send. To cancel the transmission, select Exit. 5. The radio transmits your MMSI number, your longitude, and your latitude to the other station. Putting the radio into standby If you are leaving your radio or do not wish to answer any DSC calls, you can put your radio in standby mode. If your radio receives an individual call, it will automatically respond with Uniden MHS235 Radio Owner's Manual E-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
E-27
Uniden MHS235 Radio Owner’s Manual
same way you enter directory entries (see page
22
). Enter all nine digits and press
DISP/ENT H/M/L
.
4.
The radio displays the MMSI number you are about to contact and asks you to
confirm. If you want to request the position of the displayed MMSI number, select
Send
. To cancel the request, select
Exit
.
5.
When the other station responds, the radio displays the MMSI number, the longitude,
and the latitude of the other station. If your radio is connected to a chartplotter
through the NMEA OUT connection (see page
34
), the position information will also
be displayed on the plotter screen.
6.
If the other station does not have valid GPS data, the radio displays
No Position
.
Posi±on Reply
When another station requests your current position, different screens display depending on
whether you set
Position Reply
to
Auto
or
Manual.
If
Position Reply
is set to
Auto
:
If
Position Reply
is set to
Manual
:
16
Position Request
Harris
06/20
11:00
Routine
Exit
[CLR]
USA
16
Position Request
Harris
Reply
Exit
[CLR]
USA
Send
[ENT]
No action is necessary.
Select
Send
to send a reply or
Exit
to reject
the request.
Posi±on Send
If you are requesting assistance or using an all ships call to give a safety warning, you can
send your current position so other stations know where you are:
1.
Press and hold
MENU/CALL
to display the
Call
menu.
2.
Select
Position Send
.
3.
The radio displays the names listed in your directory; use
Channel Up
and
Channel
Down
to choose the directory entry you want to contact and press
DISP/ENT H/M/L.
If you want to contact a station that is not in your directory, select
Manual
. The radio
prompts you to enter the MMSI number you want to call. Enter the MMSI number the
same way you enter directory entries (see page 22). Enter all nine digits and press
DISP/ENT H/M/L
.
4.
The radio displays the MMSI number you are about to contact and asks you to
confirm. If you want to transmit your position to the displayed MMSI number, select
Send
. To cancel the transmission, select
Exit
.
5.
The radio transmits your MMSI number, your longitude, and your latitude to the other
station.
PUtting tHe raDiO intO stanDBY
If you are leaving your radio or do not wish to answer any DSC calls, you can put your radio
in standby mode. If your radio receives an individual call, it will automatically respond with