Uniden POLARIS-BK English Owners Manual - Page 26

POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 23 4. Rotate the PUSH - SELECT knob to select the individual you want to contact, and press the PUSH - SELECT knob. 5. Press the PUSH - SELECT knob to transmit the individual DSC signal. 6. When you receive the individual acknowledgment successfully, the following screen appears, and both radios tune to the previously selected channel. You are now ready to transmit on that channel. or When the called radio has been set to standby mode, the following screen appears. JUNE BRAWLEY KENT NEWMAN PAUL HUBER EXIT INDIVIDUAL KENT NEWMAN 012345678 SEND CANCEL INDVL ACK KENT NEWMAN 012345678 COMPLETED INDVL ACK KENT NEWMAN 012345678 UNATTENDED Note: If there is not any data registered in the directory you cannot proceed to the 3rd step. See the SETUP section for directory setup instructions. Select an open (unused) working channel first, then make the call. After the acknowledgment, both radios tune to the previously selected channel. 1-B. GROUP 1. Press and hold H/L/MENU for 2 seconds. 2. Press the PUSH - SELECT knob at DSC CALL, the DSC CALL menu appears. HI CAN SHIP-SHIP DSC CALL SYSTEM SETUP REV.CH.MEM EXIT 23