Uniden PRO510XL English Owners Manual - Page 9

Specifications - mods

Get Uniden PRO510XL PDF manuals and user guides
UPC - 050633031131
View all Uniden PRO510XL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

SPECIFICATIONS Channels: Frequency Range: Frequency Control: Frequency Tolerance: Operating Temperature: Microphone: Input Voltage: Current Drain: Size: Weight: Antenna Connector: LED Meter 40 AM 26.965 to 27.405 MHz Phase Locked Loop (PLL) synthesizer ±0.005% -30ºC to +50ºC Plug in type: dynamic 13.8 V DC nom. (+ or - ground) TX: full mod., 1.7A RX: with max. audio output, 1.7A 4-1/2" W x 6-3/4" D x 1-3/8" H 1 lb. 9 oz. UHF, SO-239 Indicates relative RF output and received signal strength TRANSMITTER Power Output: Modulation: Freq. Response: Output Impedance: 4 Watts Class B amplitude modulation 300-2500 Hz 50 ohms, unbalanced RECEIVER Sensitivity: Selectivity: Image Rejection: I.F. Frequency Automatic Gain Control Squelch: Audio Output Power: Freq. Response: Distortion: Internal Speaker: 0.5µV for 10 dB; (S + N) /N typical (limit: 1.0µV) 6 dB @ 7kHz, 70 dB @ 10kHz typical 80 dB typical Double Conversion Superheterodyne 1st 10.692 MHz 2nd 450 kHz (AGC): less than 10dB change in audio output for inputs from 10 to 50,000 microvolts Adjustable; threshold less than1µV 7 watts max. into 8 ohms 300 to 2000 Hz less than 10% at 4 watts, 1000Hz 16 ohms, 3 watts round Specifications and features are subject to change without notice.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
SPECIFICATIONS
Channels:
40 AM
Frequency Range:
26.965 to 27.405 MHz
Frequency Control:
Phase Locked Loop (PLL) synthesizer
Frequency Tolerance:
±0.005%
Operating Temperature:
-30ºC to +50ºC
Microphone:
Plug in type: dynamic
Input Voltage:
13.8 V DC nom. (+ or - ground)
Current Drain:
TX: full mod., 1.7A
RX: with max. audio output, 1.7A
Size:
4-1/2” W x 6-3/4” D x 1-3/8” H
Weight:
1 lb. 9 oz.
Antenna Connector:
UHF, SO-239
LED Meter
Indicates relative RF output and received
signal strength
TRANSMITTER
Power Output:
4 Watts
Modulation:
Class B amplitude modulation
Freq. Response:
300-2500 Hz
Output Impedance:
50 ohms, unbalanced
RECEIVER
Sensitivity:
0.5μV for 10 dB; (S + N) /N typical (limit: 1.0μV)
Selectivity:
6 dB @ 7kHz, 70 dB @ 10kHz typical
Image Rejection:
80 dB typical
I.F. Frequency
Double Conversion Superheterodyne
1st
10.692 MHz
2nd
450 kHz
Automatic Gain Control
(AGC): less than 10dB change in audio output for
inputs from 10 to 50,000 microvolts
Squelch:
Adjustable; threshold less than1μV
Audio Output Power:
7 watts max. into 8 ohms
Freq. Response:
300 to 2000 Hz
Distortion:
less than 10% at 4 watts, 1000Hz
Internal Speaker:
16 ohms, 3 watts round
Specifications and features are subject to change without notice.