Uniden SCP1 Owner s Manual - Page 3

Insert the Batteries into the Camera + - CR123A Step 1 Please use the opener to press the white button, and then rotate to separate the backing casing from the camera. Step 2 Insert four batteries into the battery slot. Step 2 Close the back casing. Please press both ends of the casing to make it close firmly for good weatherproof performance. 4 ! Important Safeguards on Battery Use • The batteries must be placed in the right direction of polarity; • Do not use batteries of different brands and different models together; • Do not use new and old batteries together; • If you don't use the product for long periods, please remove the batteries from camera to avoid corrosion. Uniden AppCam Solo Supports • 3V CR123A non-rechargeable batteries • 3.6V~4.2V CR123A rechargeable batteries Important Note Uniden AppCam Solo is not designed for 24/7 full capacity running or aroundthe-clock live streaming. It's designed to record motion events and remotely view live streaming only when you need it. Please note that a new set of 4 batteries (the standard batteries we provide) will support up to 180 days in standby mode, or 800 minutes (IR LEDs off in daytime) of motion triggered recording and live view. 5