Uniden TCX930 English Owners Manual - Page 4

Installing the Belt Clip Line up the tabs with the holes on each side of the handset. Press the belt clip down until both tabs click into place. To remove the belt clip, pull both sides of the clip to release the tabs from the holes. Installing the Optional Headset Your phone may be used with an optional headset. To use a headset, insert the headset plug into the headset jack. Headsets may be purchased by calling the Uniden Parts Department. See back cover page for contact information. Charging the Accessory Handset The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charger. ) Connect the AC adapter to the DC IN 9V jack and to a 120V AC outlet that is not controlled by a wall switch. Caution: Use only the Uniden AD-0005 adapter. ) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. Route the cord. 3) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts on the charging cradle. To AC outlet To DC IN 9V AC adapter (supplied) 4) Charge the handset battery pack for at least 15-20 hours before using your new handset for the first time.