Uniden TRU8885 English Owners Manual - Page 14
Mounting the Base Unit on a Wall - telephone
UPC - 050633260166
View all Uniden TRU8885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Make the AC adapter and the telephone line cord through the hole on the wall mount adapter. 2) Plug the AC adapter into the DC IN 9V jack. 3) Plug the telephone line cord into the TEL LINE jack. 4) Slide the wall mount adapter into the notches on the base. 5) Plug the AC adapter into a standard 120V AC wall outlet. Hook the cord on the notch of the wall mount adapter. 6) Plug the telephone line cord into the telephone outlet. Hook the cord on the notch of the wall mount adapter. 7) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. www.uniden.com ! DO NOT use an AC outlet controlled by a wall switch. To remove, push up a tab on the wall mount adapter as shown. GETTING STARTED [13] GETTING STARTED