Uniden TRU9485-2 English Owners Manual - Page 17

Direct Wall Mounting, Make sure the wall material is capable of supporting the weight of the base

Get Uniden TRU9485-2 - TRU Cordless Phone PDF manuals and user guides
UPC - 050633260517
View all Uniden TRU9485-2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Direct Wall Mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5-feet of a working phone jack to avoid excessive wire lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices suitable for the wall material where the base unit will be placed. ) Insert two mounting screws into the wall, using the appropriate anchoring device, 3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for mounting the phone. 2) Refer to the steps on page 15 to complete the mounting process. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
±6
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
Try to mount your phone within 5-feet of a working phone jack to avoid excessive
wire lengths.
Make sure the wall material is capable of supporting the weight of the base and
handset.
Use #±0 screws with a minimum length of ±-3/8 inches, with anchoring devices
suitable for the wall material where the base unit will be placed.
Insert two mounting screws into the wall, using the appropriate anchoring device,
3-±5/±6 inches apart. Allow about ±/8 inch between the wall and screw heads for
mounting the phone.
Refer to the steps on page ±5 to complete the mounting process.
•
•
•
•
±)
2)